Active Campaign How To Combine Lists

Active Campaign How To Combine Lists

Active Campaign How To Combine ListsActive Campaign How To Combine Lists

You can likewise see whether the completion rate has actually increased or reduced, the length of time it takes for contacts to reach that goal, and you can browse all contacts to see who did and didn’t reach the goal. ActiveCampaign’s Message Variables is my preferred function. It saves me a lots of time and effort, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” bits”) has a similar function.

Let’s state you have the given name of only a few of your contacts, which is the case with my list. I usually do not need a given name to sign up to my list, but often I get a given name, such as when someone buys an item. Would not it be nice to welcome your contacts by name, in the cases when you have it? You can do this, however it’s cumbersome.

I’m also filtering for generic terms added by other systems, such as a dash, or “Visitor.” If they have a given name, I state “Hey,” and after that their given name. If they don’t, I just say “Hey there,” (Active Campaign How To Combine Lists). By building a Message Variable in ActiveCampaign, I can quickly alter my welcoming according to whether I have the contact’s given name.

Active Campaign How To Combine Lists

I produced a variable that’s just %greeting-hey%. If I have the contact’s name, it appears in the email. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables actually conserve me a great deal of time is by allowing me use the same automation over and over once again for my webinars, and I can rapidly change out all of the information.

Active Campaign How To Combine ListsActive Campaign How To Combine Lists

Here vary for a webinar I run called “Bust Through Creative Blocks.” You can see I have a lot of various variables here, such as the date and time of the webinar, the price of the item, offer terms, voucher code, and more. Each time I run a brand-new webinar, I can alter each of these variables to match any schedule modifications or deal changes.

And here it is in an email. This message variable allows me to quickly change out a countdown timer. I did point out earlier that one of the cons of ActiveCampaign is their e-mail editing experience. I changed from MailChimp, and MailChimp takes place to have the best e-mail editing experience. I really like to send out simple emails.

Active Campaign How To Combine Lists

I’ve discovered that really difficult to do with ActiveCampaign. For some time, I was editing e-mails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a very long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was set off by a standard design template I developed. The interface for the HTML editor looks like it was pulled from some free open-source job. Active Campaign How To Combine Lists.

Nevertheless, adding images is a little a chore. You have to select them from a file browser. There’s no drag and drop option. ActiveCampaign’s HTML email editor needs that you compose totally in HTML. The option to this, if you wish to have control over the HTML, is to modify pure HTML, with a sneak peek on the side.

Including images to ActiveCampaign’s abundant text editor is a cumbersome experience. You require different text boxes for above and below the image. Recently I have begun utilizing ActiveCampaign’s rich full-screen editor. They have some nice templates, but I still wish to send the plainest email possible. They do have some plain-looking e-mails, however they have some degree of very little format, which you can’t eliminate – Active Campaign How To Combine Lists.

Active Campaign How To Combine Lists

However, with some modifications, I can make my e-mail pretty fundamental. I can make it immediately take up the whole window, and I can fine-tune the typography to be somewhat larger, and have a bit more prominent. The most discouraging part of ActiveCampaign’s abundant text editor is adding images. Imagine you’ve simply typed out a terrific e-mail. Active Campaign How To Combine Lists.

You can’t simply add an image to a block of text. Rather, you need to create two blocks of text: one for prior to the image, and one for after the image. If you have actually made any format modifications, you’ll need to keep an eye on those to stay consistent. That’s one thing to deal with when you desire to include one image, however when you want to include numerous, it becomes a big task.

They even have a fundamental mage editor where you can crop the image – Active Campaign How To Combine Lists. MailChimp’s editor is the very best I have actually seen in all of the email marketing platforms I’ve tried. You have access to the underlying code, so you can develop a really plain e-mail, supplied you make a fundamental template first.

Active Campaign How To Combine Lists

MailChimp’s integrated image editor is very effective. You can resize, crop, and include custom-made text to your images. I miss MailChimp’s email-editing experience (Active Campaign How To Combine Lists). It would conserve me a little time to have that exact same experience on ActiveCampaign. However the highly-customizable automations I can construct on ActiveCampaign more than offset that possible time cost savings.

ConvertKit’s email modifying experience is very plain, however simple to browse. Their design templates are restricted, which is great with me, however their e-mail modifying experience is somewhat simpler because you can create inline images, and you can develop an absolutely plain email, and even modify the underlying HTML. If you wish to make some fast edits to some emails in an automation, with ActiveCampaign, it’s cumbersome.

I’ll click on an e-mail, and it takes me to the editor for that e-mail. Note that I can’t even Command + Click to open it in another tab. Whether they indicated to or not, ActiveCampaign has disabled Command + Click from the automation editor. If I desired to change backward and forward between numerous emails, I would intuitively be inclined open the exact same automation in numerous tabs, then open the respective emails from each of those tabs.

Active Campaign How To Combine Lists

In the Automations area, there’s a “Handle Messages” area. From here, you can see all of the messages in each of your automations. You can modify every one, or you can Command + Click to open each in a brand-new tab to more quickly modify your whole sequence. Active Campaign How To Combine Lists. Contrast that with ConvertKit’s Sequences.

Once again, it would save me a lot of time to have ConvertKit’s automation e-mail modifying experience on ActiveCampaign – Active Campaign How To Combine Lists. But selecting an email marketing platform resembles choosing a spouse. ActiveCampaign makes up for it with their Message Variables, more robust automations, and advanced division. Mentioning division, another reason I changed from MailChimp to ActiveCampaign was that MailChimp has restricted segmentation choices.

You can combine attributes with an AND/OR operator, and you can blend and match those groups of traits with another AND/OR operator. With MailChimp, you can just segment by AND/OR, however MailChimp’s Pro plan permits more sophisticated segmenting, for an extra $199 a month. In my look for the ideal email marketing platform, I saw numerous others, some of which I’ve already mentioned.

Active Campaign How To Combine Lists

ConvertKit. If I weren’t on ActiveCampaign, I would most likely be utilizing ConvertKit. Their automations are a lot easier to construct, though they aren’t as flexible as ActiveCampaign’s, and their divisions choices aren’t as advanced either. They also do not have goal tracking, or Message Variables. MailChimp. You currently know that I switched from MailChimp to ActiveCampaign.

Active Campaign How To Combine Lists

Active Campaign How To Combine Lists

Active Campaign How To Combine ListsActive Campaign How To Combine Lists

You can also see whether the completion rate has increased or decreased, the length of time it takes for contacts to reach that objective, and you can search all contacts to see who did and didn’t reach the goal. ActiveCampaign’s Message Variables is my favorite feature. It saves me a lot of effort and time, and neither MailChimp nor ConvertKit (update: 9/2020 ConvertKit now has ” snippets”) has a similar function.

Let’s state you have the very first name of only some of your contacts, which is the case with my list. I typically do not require a very first name to sign up to my list, however often I get a given name, such as when someone buys an item. Wouldn’t it be good to welcome your contacts by name, in the cases when you have it? You can do this, but it’s troublesome.

I’m likewise filtering for generic terms included by other systems, such as a dash, or “Guest.” If they have a very first name, I state “Hey,” and then their given name. If they don’t, I just state “Hey there,” (Active Campaign How To Combine Lists). By constructing a Message Variable in ActiveCampaign, I can easily change my welcoming according to whether or not I have the contact’s given name.

Active Campaign How To Combine Lists

I created a variable that’s merely %greeting-hey%. If I have the contact’s name, it reveals up in the e-mail. If I do not have the contact’s name, it defaults to “Hey,”. Where Message Variables really conserve me a great deal of time is by allowing me use the very same automation over and over again for my webinars, and I can quickly change out all of the details.

Active Campaign How To Combine ListsActive Campaign How To Combine Lists

Here vary for a webinar I run called “Bust Through Creative Blocks.” You can see I have a bunch of various variables here, such as the date and time of the webinar, the cost of the product, offer terms, voucher code, and more. Each time I run a new webinar, I can alter each of these variables to match any schedule modifications or offer modifications.

And here it remains in an email. This message variable enables me to easily change out a countdown timer. I did point out earlier that one of the cons of ActiveCampaign is their email modifying experience. I changed from MailChimp, and MailChimp occurs to have the best e-mail modifying experience. I actually like to send easy e-mails.

Active Campaign How To Combine Lists

I’ve discovered that very hard to do with ActiveCampaign. For awhile, I was modifying e-mails in ActiveCampaign’s hybrid editor, which is rather cumbersome. For a long time, I utilized ActiveCampaign’s hybrid HTML and WYSIWYG editor, which was set off by a fundamental template I developed. The user interface for the HTML editor appears like it was pulled from some free open-source job. Active Campaign How To Combine Lists.

Nevertheless, including images is a little bit of a task. You have to pick them from a file browser. There’s no drag and drop alternative. ActiveCampaign’s HTML email editor needs that you make up entirely in HTML. The alternative to this, if you wish to have control over the HTML, is to modify pure HTML, with a sneak peek on the side.

Including images to ActiveCampaign’s rich text editor is a cumbersome experience. You require different text boxes for above and below the image. Recently I have actually begun utilizing ActiveCampaign’s rich text editor. They have some good templates, but I still wish to send out the plainest e-mail possible. They do have some plain-looking e-mails, however they have some degree of minimal format, which you can’t remove – Active Campaign How To Combine Lists.

Active Campaign How To Combine Lists

However, with some modifications, I can make my email pretty fundamental. I can make it instantly use up the whole window, and I can tweak the typography to be slightly bigger, and have a little bit more prominent. The most discouraging part of ActiveCampaign’s rich text editor is including images. Imagine you’ve just typed out a terrific email. Active Campaign How To Combine Lists.

You can’t just add an image to a block of text. Instead, you have to create 2 blocks of text: one for prior to the image, and one for after the image. If you’ve made any formatting modifications, you’ll have to keep an eye on those to remain constant. That’s something to deal with when you want to include one image, however when you wish to include a number of, it ends up being a huge task.

They even have a basic mage editor where you can crop the image – Active Campaign How To Combine Lists. MailChimp’s editor is the finest I’ve seen in all of the email marketing platforms I’ve attempted. You have access to the underlying code, so you can create a genuinely plain email, offered you make a standard template first.

Active Campaign How To Combine Lists

MailChimp’s built-in image editor is incredibly powerful. You can resize, crop, and add custom text to your images. I miss out on MailChimp’s email-editing experience (Active Campaign How To Combine Lists). It would conserve me a little time to have that exact same experience on ActiveCampaign. However the highly-customizable automations I can construct on ActiveCampaign more than make up for that potential time savings.

ConvertKit’s email modifying experience is really plain, but easy to browse. Their templates are limited, which is great with me, however their e-mail editing experience is slightly easier because you can produce inline images, and you can produce a totally plain e-mail, and even modify the underlying HTML. If you wish to make some fast edits to some emails in an automation, with ActiveCampaign, it’s cumbersome.

I’ll click an email, and it takes me to the editor for that email. Note that I can’t even Command + Click to open it in another tab. Whether they suggested to or not, ActiveCampaign has handicapped Command + Click from the automation editor. If I desired to change back and forth between various emails, I would intuitively be inclined open the very same automation in numerous tabs, then open the respective e-mails from each of those tabs.

Active Campaign How To Combine Lists

In the Automations section, there’s a “Handle Messages” location. From here, you can see all of the messages in each of your automations. You can edit every one, or you can Command + Click to open each in a new tab to more quickly edit your entire sequence. Active Campaign How To Combine Lists. Contrast that with ConvertKit’s Sequences.

Again, it would conserve me a great deal of time to have ConvertKit’s automation e-mail modifying experience on ActiveCampaign – Active Campaign How To Combine Lists. However selecting an email marketing platform is like choosing a partner. ActiveCampaign offsets it with their Message Variables, more robust automations, and advanced segmentation. Speaking of segmentation, another reason I changed from MailChimp to ActiveCampaign was that MailChimp has restricted segmentation options.

You can combine attributes with an AND/OR operator, and you can mix and match those groups of characteristics with another AND/OR operator. With MailChimp, you can only section by AND/OR, nevertheless MailChimp’s Pro strategy permits more sophisticated segmenting, for an additional $199 a month. In my search for the perfect e-mail marketing platform, I saw numerous others, some of which I have actually currently mentioned.

Active Campaign How To Combine Lists

ConvertKit. If I weren’t on ActiveCampaign, I would probably be utilizing ConvertKit. Their automations are a lot easier to build, though they aren’t as flexible as ActiveCampaign’s, and their divisions choices aren’t as advanced either. They also do not have goal tracking, or Message Variables. MailChimp. You currently know that I switched from MailChimp to ActiveCampaign.